Training

Reference 1926.503(a)(1)
How should I be trained?
Training must be provided to each employee who might be exposed to fall hazards. In construction, this will involve most employees. The training by a competent person must enable each employee to recognize the hazards of falling and train employees in the procedures to be followed to minimize these hazards.

The training must include:
The nature of fall hazards in the work area;
The correct procedures for erecting, maintaining, disassembling, and inspecting the fall protection systems to be used;
The use and operation of guardrail systems, personal fall arrest systems, safety net systems, warning line systems, safety monitoring systems, controlled access zones, and other protection;
The role of each employee in the safety monitoring system when this system is used;
The limitations on the use of mechanical equipment during the performance of roofing work on low-sloped roofs;
The correct procedures for the handling and storage of equipment and materials and the erection of overhead protection; and
The role of employees in fall protection plans.
The standards of subpart M

The employer must verify compliance with the training requirements by preparing a written certification record.

The employer must retrain any employee when the employer has reason to believe that the trained employee does not have the understanding and skill required.

Walkways

Reference 1926.501(b)(6)

Ramps, runways, and other walkways must be protected by guardrail systems when employees can fall 6 feet or more.

The walking/working surface must be strong enough to support employees safely. If not, employees may not work on the surface. This knowledge will be gained during frequent and regular inspections made, as required, by competent persons designated by the employer.

FALL PROTECTION

Where should I expect fall protection to be provided?
When an employee is on a walking/working surface that has an unprotected edge.
When an employee is constructing a leading edge.
When an employee may fall through a hole in the walking/working surface.
When an employee is working on the face of formwork or reinforcing steel.
When employees are on ramps, runways and other walkways.
When employees are working at the edge of an excavation, well, pit, or shaft.
When employees are working above dangerous equipment (even employees working less than six feet over dangerous equipment must be protected).
When an employee is performing overhand bricklaying and related work.
When an employee is performing roofing work.
When an employee is engaging in precast concrete erection (with certain exceptions).
When an employee is engaged in residential construction (with certain exceptions)